If you are looking for the default router IP Address for numerous SMC, Edimax, Siemens and Belkin models, then 192.168.2.1 or 192.168.2.l is the most famous IP addresses, which is used in many home broadband routers to enter in router’s web-interface. Generally, when you buy router from particular manufacturer, then a default IP address set by the manufacturer (also known as default access point), which can’t be changed. This default IP Addresses are different for different routers. Similarly, The IP address 192.168.2.1 which we are talking about in this content, is the default IP address for almost all Belkin models (wireless routers) and some models made by Edimax, Siemens, and SMC. Now, If you buy similar models from manufacturer, they set it default as http://192.168.2.1 and you must be sure that it should be the same. You can also set more convenient IP address easily whenever you want.
192.168.2.1 IP address – 192.168.2.l & http://192.168.2.1 for Belkin models
More talking about the classification of 192.168.2.1 IP Address, It’s Class C private IP address, which also usually contains web-interface to control router’s configuration and admin panel. Generally, Private IP addresses are reserved for private networks which are not the part of Internet, because of home networks. Now, If you are finding hurdles while entering with default gateway http://192.168.2.1 then it must be the issues belong to some kind of network configuration, which is stopping you to connect your computer with the router.
In Short, One of the famous 192.168.2.1 IP Addresses are majorly used in Turkey, Germany, United States, Brazil and India, which include many Belkin and SMC models. Talking about competitors of SMC and Belkin which specialize in manufacturing home networking equipment, Netgear, D-Link, and Linksys brands are the popular ones in this current marketplace. When you purchase these routers, access points or IP addresses are set on devices by default by brands and models. However, you can easily configure any router or computer on a local network to change these particular specifications of router.
Note: The Internet Assigned Numbers Authority (IANA) does not grant exclusive use of the IP address to these companies; however, as other network equipment manufacturers are free to use the IP address if required or desired. The address is in the private address range defined by the IANA under the IETF authority.
Log In Using 192.168.2.1 or, 192.168.2.l
Log in to any IP Address using the admin password and username are similar to each other. Just you need to put the correct IP Address of the particular Router Model. Don’t be confused with 192.168.1.2 (also written as 192.168.l.2) instead of 192.168.2.1 . The IP Address 192.168.1.2 is generally used by TTNET, AirTies, Zyxel Routers etc! Also you need to understand, there are many more IP Addresses available according to Router’s models some of them are as 192.168.0.10, 10.1.1.1, 192.168.1.200, 192.168.1.99, 192.168.20.1, 10.1.10.1, 192.168.50.1, 192.168.10.100, 192.168.l78.1, 192.168.2.254, 10.0.0.138, 10.1.1.1, 192.168.3.1, 192.168.0.50, 0.0.0.0, 127.0.0.1, 192.168.0.3, 192.168.0.30, 192.168.4.1 & so on. These all are the IP Addresses, which are basically used in United States, Japan, UK, India, Brazil, Germany, Australia, Austria, Israel & more countries. And, we are trying to cover about each and every IP Address in our website with the Router Models.
Login to router IP Address 192.168.2.1 or http://192.168.2.1
If you’re the same ip for Belkin Router login, there are many steps involved to login in with 192.168.2.1 IP Address. In order to proceed the login method to the the router’s console, you must need to open your web browser and type in http://192.168.2.1 (Link) into your address bar. You must need to aware that you should not type the address http://www.192.168.2.1 here (To be sure that URL is correct, better to click on the provided link). If you’ll do everything step by step then your connection will be established. After that It’ll ask for your administrator username and password to login. Whether you’re using Belkin Router IP or trying any other Router login, this process remains same for all. Due to the latest technologies, some ISPs (Internet Service Providers) provide you the facility to type a name in the browser instead of the IP address, while supplying networking equipments for administrators.
Note:You’ll able to change many options within the console’s menus. As example, Sometimes your router may become disconnected from the network (may go offline). In this case, an error message will appear explaining that ‘This webpage is not available’.
Restrictions of Using 192.168.2.1
You must understand that 192.168.2.1 is a private IPv4 network address that’s why you can not link to a router which is outside your own home network. You’ll need separate addresses while running two routers on your home network at the same time. In this way, you can check out the list of Default IP addresses or you can confirm the address a local router is using, looking up the default gateway on a device currently connected to it.
If you need to change your router’s settings including the default local address, then you can use the Admin Console to change it. In this way, you need to configure and customize your router’s specifications as IP Address, Password, Security configurations, etc. within the Admin Console.
How can I change the address 192.168.2.1?
Router’s Administrator Console provides you the options to change the default local address along with other IP settings. Now, you need to follow some simple steps to change it.
1. You need to login once within your Admin Console by using default Admin Password and Username.
2. After that head towards the Network Settings showing in front of your screen.
3. Here, you’ll find the LAN section, where you will be able to change your IP address preferences to the other gateways. That’s It!
Reaching 192.168.2.1 – Way of entering in 192.168.2.1
In order to reach towards 192.168.2.1 IP Web-interface, you need to type http://192.168.2.1 manually on the browser address bar or either you can copy paste it from the website. By entering the particular IP, you can easily access the modem’s administration panel of yours. Just need to put the Admin username and Password here. Now, If don’t remember the password or the password you’re typing is wrong, then you must need to reset your router device. And, you can simply do it by resetting your modem to its factory settings. Just don’t forget to hold (20 seconds) or press the reset button for a while here, which is at the back of your device. You can also read about How to Recover router password, in case your forgot.
Belkin, Edimax, SMC, SIEMENS Models Router Username and Password List
If a router uses 192.168.2.1, you can log into the router’s console from the local network by entering the IP Address into a web browser’s address bar:
Here are the most common and majorly used default logon credentials:
We’re damn sure that now you will get understand about the IP Address 192.168.2.1 and models which use it. Generally, SMC and Belkin models use this default IP Address for network router configuration in the home, small business, or school. Other commonly used private IPv4 addresses used by competing companies such as TP-Link, Linksys, Netgear & so on. In this way, The IP Addresses such as 10.0.0.1, 10.0.0.0.1, 192.168.l.2, 192.168.0.l, 192.168.l.254, 192.168.100.1 & so on. But, you may be shocked to know that end-users most commonly use 192.168.l.l to connect to the home router for setting up the initial Internet connection, wireless LAN, or to change network security settings. If you having troubleshoot network connectivity issues, then also the addresses can be used. You can even conduct the other network function with this 192.168.1.1 IP Address.
Comment down your doubts and queries regarding 192.168.2.1 IP Address! We’ll be happy to resolve and answer you!