192.168.0.50 Admin Login, Password details. Try http://192.168.0.50 for Dlink DAP / DWL Router Login (http://dlinkap.local). 192.168.0.50 is a private IP address for use inside of a private network. This address can be used by routers, modems, and other IoT devices such as webcams and DVRs.
Hey! Today we are writing this guide for 192.168.0.50 IP address. You can learn how to perform 192.168.0.50 admin router login with default username and password. This IP address is common for Dlink routers, so if you are using one of them then this guide is for you!
192.168.0.50 Admin Login, Password – D-link DAP / DWL Router Login Setup
192.168.0.50 is a private IP address for use inside of a private network (Generally, a Local Area Network). This address can be used by routers, modems, and other devices such as webcams and DVRs. You can access your admin page by typing 192.168.0.50 into your web browser’s address bar. Keep reading our article as we will explain step by step procedure to change router password, network settings, and the following operations:
Must Check: 192.168.20.1 Admin Router Login
- Changing the name (SSID) of your wireless network.
- Changing the password (encryption key) of your wireless network.
- Changing your router’s firewall rules to allow inbound or outbound traffic on specific network ports.
- Changing the domain name servers (DNS) used by your router to resolve network addresses.
- Changing the username and password used to access your router’s administration interface.
- Enabling or disabling remote administration for your router, which allows the administrator to configure the router from a computer outside the network.
- Setting parental controls to restrict access to specific websites from your network.
192.168.0.50 Login, Password and, IP
Follow the steps mentioned below in order to access your router’s admin panel:
- Enter 192.168.0.50 in the URL bar of your browser for example http://192.168.0.50.
- Make sure that your device is connected to the router either wirelessly or with ethernet.
- Now you’ll be greeted with the following screen :
- If you encounter an error page then there is a possibility that 192.168.50.0 is not the IP address of your router.
Therefore, you may check the table attached below for the default login IP address.
- Now enter the username and password of your router, if you have never changed your login credentials then try the below combination (Username / Password):
admin / none
admin / (blank)
admin / (none)
- Most probably one of these combinations will work for you and you’ll see the following screen:
- Congratulations! If you are seeing the above-displayed screen then it means you’ve successfully performed router admin login.
- You can also use the address http://dlinkap.local for checking dlinkap, dlinkapwxyz, dlink local setup wizard, dlink local login & dlink local 1520.
- In fact, many D-link Dap routers using this IP Address 192.168.0.50 example routers are; D-link DAP-1320, D-link DAP-1325, D-link DAP-1650 & so on.
Devices using 192.168.0.50 for Login with http://192.168.0.50
|Status||Default Username||Default Password|
Change 192.168.0.50 Dlink Default Login
Since the security of a network is vital, the first and foremost task is to change the Dlink router Default Login and Password to something more personal and secure. Here are the steps:
- Look for – Maintenance (found in the menu bar at the top of the page), and click on it.
- Look for – Admin (found in the left-hand side menu bar), and click on it.
After navigating to these sections, you can easily find the option for changing your router’s password.
How to find Router Login IP Address?
Generally, most of the routers utilize 192.168.1.1, 192.168.100.1, 192.168.1.254, 10.0.0.0.1 but if your router doesn’t match with our list then we have a detailed article written on Router Login IP address. You can check that in order to find your login IP Address. Alternatively, you can try the following steps to find the default IP address:
- Open a command prompt from within Windows.
- In Windows 7, click on the Start button and type cmd in the Search programs and files field and press Enter.
- In Windows 10, just type cmd in the Cortana search field and press Enter.
- At the command prompt window, type “ipconfig” at the prompt itself and press Enter.
- Scroll to the top of the window until you see a setting for Default Gateway under Ethernet or Wi-Fi.
- That’s your router, and the number next to it is your router’s IP address.
Note: The process for logging into your router should be the same whether you use your internet provider’s router or you purchased your own router. It should also be the same whether you use a dedicated router or a combination modem/router supplied by your provider. If you are facing any problems even after following all the steps correctly then you can comment below and we’ll try to solve any issue related to 192.168.0.50.