10.0.138 is one of the famous and popular router login IP address just like 10.0.0.138. As, we’ve already discussed about many router login IP addresses, like 192.168.1.1 (also written as 192.168.l.l), 192.168.0.1, 192.168.l.254 and 192.168.l.2. IP Address 10.0.138 or, 10.0.0.138 is majorly used in countries like Australia, Israel, Austria, Czech Republic, Norway, and Palestinian Territory, Occupied. 10.0.0.138 is known as a private IP address to use inside of a private network (can say it device’s web-interface). This address can be used by routers, modems, and other IoT devices such as webcams and DVRs to do login through the administration panel. Modems like Belong and Telstra use http://10.0.0.138 and http://10.0.138, both of the IP Addresses for Login Gateway. You can also read the details about Telstra login, Telstra gateway, Belong login, 10.0.138 login admin, 10.0.0.138 gateway & more on further below in this post.
- Must Check: 192.168.l78.1 Login Admin (FritzBox, TelNet)
Most Common 10.0.0.138 Logins (Telstra mygateway login)
Whether you are using any of the IP Addresses, Login Admin with Username & Password is mandatory. Why It’s necessary? Because, when you usually click or type the URL into the web address bar, A web page opens in front of you and asks you to enter the administrative username and password which comes along with your modem Router’s device (Telstra/Belong/any other). And, you can easily manage the network settings with the help of 10.0.0.138 or, 10.0.138 IP Address. So this way, It becomes much easy to log in and install the provided IP by inserting the password. The further details about Username and Password for 10.0.0.138 Login Admin gateway are given below:
Username / Password
admin / admin
none / none
(no default) / (no default)
admin / none
none / (printed on the bottom of the device)
none / (none)
Telek0m / Austria&Eur0
Access Your Admin Page: You can access your admin page by typing 10.0.0.138 into your web browser’s address bar. You can also access it by clicking this link: 10.0.0.138 (Link) & 10.0.138 (Link).
Check also: Default Router Username and Password List (Netgear, Linksys, D-link)
- NOTE: The IP address 10.0.0.138 is registered by the Internet Assigned Numbers Authority (IANA) as a part of the private network 10.0.0 .0/24. IP addresses in the private space are not assigned to any specific organization and anybody may use these IP addresses without the consent of a regional Internet registry as described in RFC 1918, unlike public IP addresses.
Keep reading our post to know more about 10.0.138 & 10.0.0.138.
10.0.0.138 – Login Admin http://10.0.138, Belong/Telstra Login Gateway
Telstra & Belong Modem routers use 10.0.0.138 & 10.0.138 IP addresses majorly. Below you can find information about entering in the administration panel of Telstra routers. To perform Belong login, you can follow the steps mentioned below. Although the screenshots are for Telstra login it should work for Belong routers too! Give it a shot, if you face any issues then comment below and we’ll help you.
Also Read: 192.168.l.0 Login Admin Password – http://192.168.1.0 Router IP
- Note: 10.0.138 and 10.0.0.138 are easily confused with each other. Both networks are the same but use differently according to location. It can also be differentiated from Home networks & Private networks.
10.0.0.138 admin panel login guide
- Type http://10.0.138 or, http://10.0.0.138 in the URL bar.
- Alternatively, you can click here.
- You should be greeted with Telstra/Belong gateway login window.
- Once on the login portal, enter your default username and password.
- You may need to check the router or the booklet for finding 10.0.0.138’s router-id pass login.
- If you don’t have the credentials with you then check our post of Router Default username and password.
- Once logged in, you can make all the changes that you want to do.
Don’t miss: Default Router IP Address List
Forgot 10.0.0.138 Login username and password
- Locate a small pinhole in your router, generally towards the back.
- Use a small pin or something similar to insert it into the hole.
- Keep pressing it for 15-20 seconds.
- Your router will restart and it should have been reset.
- Now try to login with the default IP, username, and password.
- If it is still not working then comment below and we’ll look for some other solution too.
- Now you can change wifi password after resetting your router.
Must Check: How to Find Router IP Address (Windows 10, Mac OS, iPhone iOS, Android)
Find Telstra default Gateway Address (Belong Router IP)
It’s the human brain and can easily forget the router’s IP address. So, First of all, don’t panic when you forget the IP Address. So, if you are wondering how to access Telstra gateway; then worry not! Below we have combined a couple of methods.
- Returning router’s IP address by checking it
- Returning router’s IP address by RESETTING method. To do it, you need to find the reset button, press and hold it for about 30 seconds
Notice: Resetting of your router will return your settings to factory defaults. It means that all changes that you have done will be cleared. IP address would be returned to 10.0.138 / 10.0.0.138 too, so you can use it when entering in administration panel by using default “admin” password and username.
Notice: You mustn’t reset your router, if there are no problems, which can be solved by this method. Don’t forget that all changes would be cleared!
How to change Wifi Password
To change the wifi password follow the steps mentioned below:
- Log in to your router with the help of the above-mentioned IP addresses.
- Use the default credentials to log in.
- Go to Setup -> Wireless Security.
- Select Security mode (if you don’t know what you’re doing then leave it to default).
- Edit your pre-shared key (This is the wifi password).
- Click Apply.
- Go to management and select Reboot.
- Wait for the process to complete.
- Congrats, you’ve successfully changed your wifi’s password.
Read Also: 10.0.0.1 & 10.0.0.0.1 – Comcast Xfinity Router Login and How to access
Devices using 10.0.0.138 / 10.0.138 Login Admin Gateway
Model | Admin Username | Admin Password | Device Type |
---|---|---|---|
2Wire | |||
2071-A | none | none | |
2701HGV-W | none | (printed on the bottom of the device) | |
Alcatel | |||
SpeedTouch 530 | none | none | |
SpeedTouch 570 | none | none | |
SpeedTouch Home | (no default) | (no default) | |
SpeedTouch Pro 4-Port FW | none | none | |
SpeedTouch Pro 4-Port | none | none | |
SpeedTouch Pro | admin | admin | |
TG782T | admin | none | |
Netcomm | |||
3G9WB | admin | admin | |
3GT1WN | admin | admin | |
N3G9W Supplied by Telstra | admin | admin | |
Netgear | |||
EVG2000 | admin | admin | |
Pirelli | |||
PRGAV4202N | Telek0m | Austria&Eur0 | |
Siemens | |||
SpeedStream 4200 Bigpond | admin | admin | |
Sierra | |||
AirCard 753S | admin | admin | |
AirCard 760S Bigpond | admin | admin | |
Thomson | |||
SpeedTouch 530 | none | none | |
SpeedTouch 530 | none | (none) | |
SpeedTouch 570 | none | none | |
SpeedTouch Home | admin | admin | |
SpeedTouch Home | (no default) | (no default) | |
SpeedTouch Pro | admin | admin | |
SpeedTouch Pro 4-Port FW | none | none | |
SpeedTouch Pro 4-Port | none | none | |
TG782T | admin | none |
Common Router passwords by brand
Brand | Username / Password |
---|---|
4ipnet | Admin/Admin |
AboCom | Admin/admin or password |
Accton | root/(none) |
Acelink | Admin/Admin |
Actiontec | Admin/password |
Adb | admin/admin or password |
AddTron | root/(none) |
Airlink+ | admin/admin |
AT&T Uverse | Refer to sticker/Refer to sticker |
Apple Airport | (empty)/public |
ASUS | admin/admin |
Arris | admin/password |
Belkin | (blank)/(blank) |
CenturyLink Zyxel | admin/motorola |
Cellspot | admin/password |
Cisco | cisco/cisco |
D-Link | admin/(empty) |
Netgear | admin/password |
Netgear | admin/1234 |
TP-Link | admin/admin |
Linksys | (blank)/admin |
Ubiquiti | ubnt/ubnt |
Ubee | user/user |
XFINITY from Comcast | admin/password |
Zero One Technology | admin/0000 |
Zonet | guest/guest |
Zoom | admin/admin or zoomadsl |
ZTE | admin/admin |
ZyXEL | admin/admin or 1234 |
How do I access my Telstra modem settings for Login Gateway?
To view and edit your Telstra-supplied modem settings, such known as Wi-Fi Network Name, Password and DNS Settings, you need to know your modem’s default address – or home page.
- Must Check: 10.1.1.1 iiNET
Here are two options available for finding it easily:
Option 1
Find your Telstra modem’s default address:
- 1. Ensure your modem is connected and you have a green Wi-Fi light
- 2. Use a computer or tablet to connect to your Wi-Fi home network
- 3. Open a web browser (Chrome, Internet Explorer, Firefox, Safari)
- 4. Enter the correct URL for your modem:
For nbn™/ADSL/Velocity/Cable (with Adapter) modems – enter http://10.0.0.138 or http://telstra.gateway/
For Cable (without Adapter) modems – enter http://192.166.0.1 or http://telstra.gateway/
- 5. If your modem is a Telstra Gateway Frontier®/Telstra Smart Modem – no matter what technology type – enter http://192.168.0.1 or http://mygateway/
Option 2
Find your modem’s default address through your computer:
For Windows (Vista, 7, 10) users
- 1. Open Command Prompt by holding WIN + R together and type: cmd.exe then hit Enter
- 2. Type ipconfig and hit Enter
- 3. Next to Default Gateway, the address will be listed.
For Windows (8 and 8.1) users
- 1. Open Command Prompt by holding WIN + X together and choose Command Prompt
- 2. Type ipconfig and hit Enter
- 3. Next to Default Gateway, the address will be listed.
For Mac users
- 1. Click the Apple icon and select System Preferences from the drop-down menu
- 2. Then select Network
- 3. Select your connected internet connection. This depends on whether you’re using Ethernet or Wi-Fi.
- 4. If you’re connected via Wi-Fi, click Advanced and select the TCP/IP tab, and you will find the default gateway address listed next to Router.
- 5. If you’re connected via Ethernet your default gateway address will be next to the Router.
Reference: https://www.telstra.com.au/support/category/broadband/manage/finding-your-default-gateway-address
Fastest Way to Logging to 10.0.138 / 10.0.0.138
If you want to log into the 10.0.0.138 IP address then here’s the fastest way to logging in: http://10.0.138/ (Link) or, http://10.0.0.138/ (Link). There are two ways to go through this IP address. Firstly, you can directly copy the address and paste it into your browser address bar. Another one is, you can manually enter the ip address by typing the number delimited by full stops (periods) within your any of the browser address bar.
- You must check: 192.168.2.1 Admin Login Password
Getting Error: THIS SITE CAN’T BE REACHED
10.0.0.138 took too long to respond.
Try:
- Checking the connection
- Checking the proxy and the firewall
- Running Windows Network Diagnostics
- This site can’t be reached
- 10.0.0.138 refused to connect.
ERR_CONNECTION_TIMED_OUT
OR,
ERR_CONNECTION_REFUSED
If you are getting an error like this while tried to connect to your router with any of the IP Addresses, the cause might be one of the following:
- your router IP address is different e.g. 10.0.0.138
- your router is turned off
- your LAN cable is disconnected
- your wifi or LAN connection is disabled
- your or router firewall is stopping you to access the router
- your wifi or LAN is not installed properly or it has malfunction
- your router has malfunctioned
ZyXEL P8702Nv2 Router login for 10.0.0.138 (Change Password/SSID/Username)
For changing your Router name, login password, and other network settings you should follow the steps mentioned below:
- Open your Browser (Google Chrome preferred over others)
- Enter 10.0.0.138 in your URL bar or simply click on the IP on our page.
- Now you will be greeted with the ZyXEL P8702NV2 login screen.
- Enter your Username and password for the router settings.
- Generally, the default username: admin, and the password: unknown. If you don’t remember the username and password, you can reset the router by using the guide on our website.
- Congratulations, you’ll be able to login to your router.
ZyXEL Router change password and username
- Go to the Maintenance section in your router configuration settings (which you just logged in via 10.0.0.138)
- Now look for the User Account section
- Here you will get the option to change the password
- Make sure that you use a strong password (Lowercase, Uppercase, numbers, and special characters all mixed up) so that it becomes difficult to brute force
- From this menu itself, you can change SSID, for that look under Network Settings Section.
Conclusion
I guess now you’re comfortable with using both IP Addresses as 10.0.138 / 10.0.0.138 and can easily do the required changes. For any help, query, or doubt you may comment below and we’ll try to reply as soon as possible.
You must try reading our other tutorials similar to this IP Address to gain more knowledge about this subject.
Thank you for reading.